Using a universal remote has several types of codes to program the TV, DVD, CABLE BOX, and other entertainment equipment. The remote manufacturer designed the code list separately for each brand’s devices. If you want to program the universal remote for the Arris cable box, you can find the codes in this post. See the Arris cable box remote codes and remote programming instructions below.
Arris Cable Box Codes Complete List
This process guides you to program a remote using Arris cable box codes. You’ll need one valid code per device. If initial codes don’t work, try others until successful. This applies to various remotes, including the Brighthouse remote codes, which may require a reset if problems persist.
5-Digit Codes
- 52187
- 51982
- 52378
- 51998
- 51376
- 42384
- 42717
- 45832
4-Digit Codes
- 1585
- 1998
- 5097
- 0858
- 1274
- 5131
- 2952
- 5537
- 2187
- 2437
- 1982
- 3723
- 0476
- 1376
- 2378
3-Digit Codes
- 134
- 217
- 132
- 287
- 176
- 198
- 245
- 219
Arris Remote Codes For TCL TV
Arris remote is designed with some codes for TCL TV, which you must use when you program the Arris remote to your TCL TV. Several codes are recommended for a TCL TV, but a single code is enough to program the remote. Similarly, when going through the Sparklight remote setup, you may also need to try different codes until you find the one that programs successfully. If the remote doesn’t pair with a code, you can use the rest of the codes until the remote is programmed successfully.
11756, 12434, 12290, 12292
How To Program A Arris Universal Remote With Codes
Before programming or pairing your remote with a device, such as in the Hallmark GE Universal remote manual process, you must note down the relevant codes to complete the procedure. These codes are designed to recognize your device without errors, facilitating remote commands for all devices. Much like when you’re programming an Arris universal remote with codes, remember that these codes are a fundamental part of the programming process, as outlined in the Hallmark GE Universal remote manual.
- Collect the codes for the device you wish to control with the remote. Also, you can take a screenshot using your smartphone. It is the easiest way and helps you when you want to see codes quickly.
- After collecting all the codes, ensure your device is connected correctly and “Turn ON” the device. Insert new batteries into the remote control to send solid signals to the device. Keep the remote in front of the cable box from an appropriate distance, avoiding errors during the remote programming.
- To Start the remote programming, press the “CBL” button on the remote until the LED light turns on the remote. The LED light is an indicator that indicates when your remote comes into programming mode. After this, release the “CBL” button immediately.
- Now, enter the code first on your remote using the remote keypad. Enter the code correctly, as mentioned in the list. If you enter an incorrect code, the remote may not work as expected.
- After entering the code correctly, keep the remote towards the device and press and hold the “POWER” button on the remote. The CBL should turn off when you press the “POWER” button on the remote, which means the remote has found a valid code.
If the device doesn’t turn off, use another code and follow the programming instructions from step 2.
After completing the programming successfully, test the Frontier remote control by attempting to use it with your LG TV. If all the functions work as expected, your remote is programmed successfully. However, if not, try to reprogram your remote using alternative Frontier remote codes for your LG TV until the remote syncs with the correct code.
How To Fix Arris Cable Box Remote Not Working
Several ways are available to fix the problem when your cable is not working as expected.
1. First, change the batteries in the remote because old batteries can’t send solid signals to the device.
2. If the problem doesn’t solve even after you have changed the batteries, run the power cycle. Remove all the cables from the device and wait for ten minutes. As well as press the “POWER” button on the cable box for 15 seconds. After fixing these two issues, check the remote to control your device.
3. Also, sometimes your remote does not work as expected if there is any internal error such as incorrect programming and version problem. Try to reprogram your remote or reset your remote by removing batteries from the remote for a minute and pressing the “POWER” button to erase the previous program and reset the remote control.
Conclusion
With a valid code, an Arris cable box can be programmed with a universal remote. Ensure to note down the codes before starting the programming process. If the device doesn’t respond as expected or if your Suddenlink remote isn’t functioning, consider reprogramming the Suddenlink remote using the error-fixing solutions mentioned in this guide. For any uncertainties or issues, feel free to leave a message in the comment box.