Hallmark Universal Remote Codes To Program

Hallmark universal remote is designed to control multiple devices.You can control up six devices using this single universal remote. You must have remote codes and know the programming procedure to use this universal remote. Like all universal remote manufacture codes to program the remote. 

How To Program A Hallmark Universal Remote

You can program this universal remote using manual and auto-code search methods. Both methods are recommended, but one is enough to program the remote. I will discuss both techniques in this post. In this method, you must enter the corresponding device code on the remote. If the entered is correct, you can control all the features of your remote. You can try another code assigned for the same brand device if the code is incorrect.

  1. Turn on the device you wish to control using Hallmark universal remote.
  2. Insert two new batteries into the remote. 
  3. Locate the remote to the device (TV, DVD, VCR, or any other). Press the desired device key on the remote until the LED indicator turns on. Now, your remote is ready to program.
  4. Enter the code you selected for your device using the remote keypad. 
  5. The LED indicator will turn off after entering the code. 

Now, test your remote to control your device. If the device is responding as expected, the remote is programmed successfully without any error. If the device doesn’t respond or a few buttons only work, you must program the remote using another code assigned for the device brand and type.

Auto-Code Search Method: (Without Using Codes)

 You don’t need to enter a code in the auto-code search method manually. The remote will search for a valid code for the device during the remote programming. Follow the instructions carefully to program the Hallmark universal remote in the auto-code search method.

  1. Turn on your device to control with Hallmark universal remote.
  2. Insert new batteries into the Hallmark universal remote.
  3. Keep the remote at the sensor and press the corresponding device key. For example, TV.
  4. Hold the “TV” button until the Volume symbol appears on the screen.
  5. After this, release the “TV” button immediately to save the code.

Now your remote setup is completed. You can control the device using the Hallmark universal remote. 

Hallmark Universal Remote Codes List

Hallmark universal remote has designed a set of codes to program the remote. You must enter these codes when you program the remote. The codes recognize the device and enable the remote settings to control your device. If you notice several codes for a single device, you can try all the codes one after one until the remote gets a valid code. You can try the auto-code search method if you fail to enter a code or your device is not listed in this Hallmark universal remote codes list. You don’t need to enter a code in this auto-code search method manually. The remote can find a valid code while programming the remote. See both ways to program the remote, but choose a single method to program your remote controller.

  • 2851
  • 0051
  • 147
  • 0001
  • 1221
  • 0038
  • 0002
  • 0502
  • 10178
  • 1004
  • 1006
  • 1196

Why is My Hallmark Universal Remote Not Working

There are several reasons why the Hallmark universal remote is not working. You will need to fix all the issues one after one until the programmed resolved. I will tell you a few solutions to fix the remote error. 

Batteries: First, you must check the batteries in the remote. Old batteries may not work to control your device due to weak signals. Insert new batteries into the remote and test the remote controller.

Reprogram the remote controller: It may not work as expected if the remote doesn’t program correctly. Try to reprogram your remote using the programming method mentioned earlier in this post.

Reset your remote: You can reset it if it is not working after you have programmed it with a valid code. Remove the batteries from the remote and press the “POWER” button for ten seconds to reset your remote.

After that, insert new batteries in the remote and press the “POWER” button once.

Conclusion: Hallmark universal remotes can be programmed in two methods. But the manual method is recommended. If the manual process doesn’t work, you can try another way to program the remote. Note down codes for your device before going to program your remote, and read all the instructions carefully to program the remote. If you have any doubts or errors, leave a comment for us.

Leave a Comment