Do you want to configure your Sony DVD Player device with the GE universal remote control? Our guide helps you set up your universal remote control to operate multiple devices using one GE universal remote control. By any means you have misplaced or damaged your original sony DVD player remote, then it will affect your home entertainment. Finding a replacement remote or searching for the original device remote is costly and takes time. But if you own a universal remote, it will resolve your problem of searching for a compatible remote and remove the clutter of having individual remotes for all electric devices. Here we have updated a wide range of GE universal remote codes for the sony receiver and universal remote codes along with program instructions to set up the remote control.
GE Universal Remote Codes for Sony DVD Player
For your sony DVD player, you can find many remote codes below. We have combined all 3-digit, 4-digit, and 5-digit GE universal remote DVD codes according to the remote brands. So you need to check out the list, select a code available for your remote brand, and start following the programming steps. There are multiple codes for a single brand listed in the codes list. So, If a remote code doesn’t work to set up the remote control for your sony DVD player, then you need to choose an alternative remote code and repeat the programming process.
- 2865
- 0535
- 3995
- 3055
- 3685
- 3825
- 2985
- 2305
- 4165
- 2165
- 0905
- 0895
- 0725
- 0715
- 0365
- 4275
How to Program GE Universal Remote to Sony DVD Player
There are various ways to program a sony DVD player remote control, such as direct code entry, manual method, and auto-code search method. Below, we have given step-by-step instructions to program a universal remote using the direct code entry method and GE universal remote cl4 codes for the sony blu ray player list. You can use the auto-code search method if you don’t find a perfect code to program your remote from the given code list. It will automatically scan the device library to find a suitable code to program the remote. Follow the programming steps below to set up your GE remote control for the sony DVD player, and to know how to program a GE universal remote to a sceptre tv, go through this.
- Manually switch on the device you wish to program the remote.
- Seek the universal remote codes for the sony DVD player remote you are programming.
- Tap & leave the device category button on the remote.
- Start with the enter code available in the codes list and enter the codes using keys available in the remote.
- Aim the remote at the sony DVD player and test by pressing different keys to check if the device responds.
- Repeat the same process for each device you want to program the remote control.
Final words:
We hope you will find our article helpful in programming your sony DVD player remote control. If you want colorways universal remote codes Vizio, please check it out. Please write us about how you feel about this page so we can improve further to serve you better. Also, you can share any new codes if you have them using the comment section below.