GE Universal Remote Codes for DVD Player

Do you want to configure your favorite universal remote for a DVD player? If yes, then you are on the right page. To program a remote control for the DVD player, you need GE Universal remote DVD codes and program instructions. That’s why we have updated all the GE DVD remote codes on this page along with universal remote programming methods for GE universal remote codes for LG DVD player go here. These codes are easy to feed 3-digit or 4-digit codes used according to the remote brand and type you have.

GE Universal Remote Codes for DVD Player List

This page specifies a list of GE universal remote codes for the DVD player below. These codes are categorized based on the remote brand’s example, GE universal remote codes for the Magnavox DVD player. So initially, you need to check the user manual and find the code list version of your remote. According to that, select a 3-digit,-digits, or 5-digit universal code for your remote brand and start programming. You can use alternative codes for your remote brand if a code doesn’t accept.

How to Program a GE Universal Remote to DVD Player?

Various methods are available for programming a universal remote like the manual, code search(for example, sony DVD player codes for GE universal remote), or direct entry. You can select any of these methods at your convenience and start programming. All you need is GE universal remote codes for the DVD player and steps to configure the remote. Below here, we have covered some programming methods along with instructions:

Manually Entering Codes:

1. Turn on the device you are programming the universal remote.
2. Tap & hold on to the SETUP /CODE SEARCH button on the remote till the led indicator illuminates, and then release.
3. Click and release the device key you are remote programming (DVD, TV, VCR). If you are programming a universal remote for AUX, click on AUX and then the device button you assign to the AUX. The indicator light will once blink off and then remain lit.
4. Enter your device’s GE DVD remote codes using the numeric keys. After you have entered the remote codes, the led indicator will turn off.
5. Point out the remote at the device and tap on the POWER key. When you tap on the power key device should be switched off.

Note: If the device doesn’t respond with the first universal code, try using alternative remote codes available in the list. And if still, the device doesn’t respond after trying all the remote codes, then program using the code search method to process GE remote codes for Sylvania tv post.

Code Search Function:

If your remote brand is unavailable in the code list or the code listed for your remote brand is not working, then you may try searching for universal remote codes using this method. This will search for the previously-stored codes in the remote.

1. Switch on the device manually that you would like to operate.
2. Tap & hold the CODE SEARCH/SETUP key until the light indicator illuminates, then leave the key.
3. Tap & release the device key for which you are programming the remote. The led indicator will blink off and then remain on.
4. Click on and leave the Power key until the device is switched off. Now, wait for a minimum of 2 seconds between each key press. You should press the power button up to 250 times.
5. When the device turns off, tap the power key. The led light will go off.

Final Words:

We hope you will find this helpful article on universal programming remotes for DVD Player devices for Samsung DVD codes for GE universal remote visit here. Remember to share your feedback and suggestion with us. Also, let us know if you have any new universal codes yet to need to be updated here or want us to add any new code or programming method.